inglese

Accessories for Batteries

SOLUTIONS FOR THE CONSERVATION 
AND THE EXTENSION OF THE DURATION OF LEAD BATTERY
 
 

AUTOMATIC BATTERY SWITCH

What to do to avoid that, inadvertently leaving lights switched
on and/or board services, it drains the battery?
The automatic battery switch is a device that disconnects the battery when the voltage of the same comes less than 11.9 V for more than 30 seconds so you always have the charge necessary for starting the engine.
Small, lightweight and practical. It can be installed directly on the positive pole of the battery and when it comes into operation just press the reset button.
It is very useful for vehicles equipped with additional battery for the accessories; putting the battery isolator between the starter battery and the additional battery , you can have all the capacity of the battery with the security  to start the engine.
It is
 recommended for campers, cars, motor boats and special vehicles.

 

MODEL
 
BB12V
BBT12V
BB24V
Operating Voltage
Vdc
12
12
24
Intervention Level
Vdc
11.9
11.9
23.8
Counting Time
.sec
30”
30”
30”
Dimensions (LxWxH)
mm
110 x 55 x 65
110 x 55 x 65
110 x 55 x 65
Weight
Kg
0.3
0.3
0.3
.
.
.
remote control
.

 

 

KEEPER IN CHARGE FOR LEAD BATTERIES

 
After leaving a vehicle inactive for a certain period you can often find the battery completely run down due to the natural self-discharge as well as to antitheft devices, clocks and other services that are always powered.
When connected to the vehicle battery the DURABATT delivers  current that is used to compensate the consumption, ensuring to the battery a longer life.
The DURABATT is essential for campers, cars, motorcycles, boats.
The  batteries will be always prompt and efficient.
It’s possible to connect up to 4 batteries.
 

MODEL
 
BC4 “DURABATT”
Input
Vac
230
Output
Vdc
12 or 6 (on demand)
Battery Specifications
type
V
A
Lead (Pb)
12 V
with any capacity from 5 A
Dimensions (LxWxH)
mm
150 x 160 x 90
Weight
Kg
1.9

 

 

POWER SUPPLY AND BATTERY COMBINER

 
 
 
Power supply and battery backup combiner. 

Necessary when a buffer battery is connected to the power supply

to obtain power output also in case of lack of grid.
When the grid is active the  system recharges the batteries.

 

MODEL
 
KB13
Voltage
Vdc
12
Max. Load
A
10
Dimensions (LxWxH)
mm
70 x 60 x 38
Weight
Kg
0.18

Contacts
ZETAGI s.r.l.
Via Ozanam, 29
20863 Concorezzo (MB)
Tel. +39 039 60 49 346
Fax +39 039 60 41 465
info@zetagi.org
Legal notice
P.iva: 04618030151 / 00785200965
Capitale sociale: 100.000,00 i.v.
Reg. Imprese Milano: n° 17080
Rea: 1026497
Privacy policy